Velocity model and static corrections used by N. Cuenot to locate seismic events acquired from the downhole and surface network - Soultz-sous-Forêts 2000 Stimulation

Dataset in collection Episode: 2000 Stimulation Soultz-sous-Forêts

Velocity models from Cuenot’s thesis were built from GPK1 sonic logs and calibration shots, first as an initial model for preliminary locations, then refined into the final model.

Soultz-sous-Forêts

2000

Model

Last updated on July 1, 2026

3D velocity model of the whole Upper Rhine Graben

Dataset

A 3D velocity model of the Upper Rhine Graben (Lengliné et al., 2023), defined on a ±100 km grid.

Soultz-sous-Forêts

2023

Model

Last updated on June 26, 2026

Dataset related to the article "Direct modelling of the mechanical strain influence on CWI and implications for strain monitoring of reservoirs"

Dataset

Dataset containing the figure‑generation data from Azzola et al. (2017) on mechanical‑strain effects in coda‑wave interferometry (JGR). The work was funded by LABEX G‑EAU‑THERMIE‑PROFONDE, the French ANR, and the EU H2020 DESTRESS project, and is released under a CC BY 4.0 license

2017

Seismology / Model

Last updated on June 15, 2026

Velocity model used by N. Cuenot to locate seismic events with a tomographic inversion method - Soultz-sous-Forêts 2000 Stimulation

Dataset in collection Episode: 2000 Stimulation Soultz-sous-Forêts

1‑D layered velocity model from N. Cuenot’s PhD, used as the input model for the local tomographic inversion that produced his second microseismic catalogue of the 2000 Soultz‑sous‑Forêts episode. It provides the reference velocities required to refine event locations.

Soultz-sous-Forêts

2000

Model

Last updated on June 15, 2026

Velocity model and station corrections used by N. Cuenot to locate seismic events recorded by the downhole and the surface network - Soultz-sous-Forêts 2000 Stimulation

Dataset in collection Episode: 2000 Stimulation Soultz-sous-Forêts

1‑D velocity model and station corrections from N. Cuenot’s PhD, used to locate microseismic events of his first 2000 Soultz catalogue with a refined HYPOINVERSE workflow (iterative Vp, Vp/Vs adjustments and station corrections).

Soultz-sous-Forêts

2000

Model

Last updated on June 15, 2026

1993 VSP at Soultz-sous-Forets Phase 1

Dataset in collection Episode: 1993 Stimulation Soultz-sous-Forêts

A VSP survey was acquired in EPS1 and GPK1 from 3–5 May 1993, using P‑ and S‑wave vibrators at locations A2, A3, B1, B2, C3, C4, D1, D2. Four acquisition runs combined P, S‑NS, and S‑EW sources at these points for both wells.

Soultz-sous-Forêts

1993

Model

Last updated on June 11, 2026

1993 VSP at Soultz-sous-Forets Phase 2

Dataset in collection Episode: 1993 Stimulation Soultz-sous-Forêts

A VSP survey was acquired in EPS1 and GPK1 from 15–17 September 1993, using P‑ and S‑wave vibrators at sites A, D, and E. Four runs combined P and S sources at these locations for both wells.

Soultz-sous-Forêts

1990 - 1991

Model

Last updated on June 11, 2026

GeORG 3D Geological Model—Soultz-sous-Forêts

Dataset

The GeORG project provides a 3D geological model of the Upper Rhine Graben. The BRGM distributes the French section, from which a 10 km cut‑out around Soultz‑sous‑Forêts was extracted, including major lithological interfaces and faults.

Soultz-sous-Forêts

2012 - 2014

Model

Last updated on June 11, 2026

Geological sections from GeORG-Rittershoffen

Dataset in collection Episode: ECOGI geothermal project at Rittershoffen - development phase

The GeORG project (2008–2012) built a 3D geological model of the Upper Rhine Graben, offering maps and cross‑sections accessible online. A subset around the Rittershoffen site was extracted for use.

Rittershoffen

2012 - 2014

Model

Last updated on June 11, 2026

GeORG 3D Geological Model — Rittershoffen

Dataset in collection Episode: ECOGI geothermal project at Rittershoffen - development phase

The GeORG project produced a 3D geological model of the Upper Rhine Graben. The BRGM distributes the French section, and a 10 km cut‑out around the Rittershoffen site was extracted, including major lithological interfaces and faults.

Rittershoffen

2012 - 2014

Model

Last updated on June 11, 2026

GeORG 3D Geological Model —Vendenheim

Dataset in collection Episode: Geoven geothermal project at Vendenheim

The GeORG project provides a 3D geological model of the Upper Rhine Graben. The BRGM distributes the French section, and a 10 km cut‑out around Soultz‑sous‑Forêts was extracted, including major lithological interfaces (Plio‑Quaternary to Hercynian), salt diapirs, and faults.

Vendenheim

2012 - 2014

Model

Last updated on June 11, 2026

Velocity model used to locate seismic events from the surface network - ECOGI geothermal project

Dataset in collection Episode: ECOGI geothermal project at Rittershoffen - development phase

Interval seismic velocities applied to the 3D velocity model. Vp, Vs and Vp/Vs values for each formation along GRT-1 well.

Rittershoffen

2020

Model

Last updated on June 10, 2026

Velocity model and static corrections used to locate seismic events from the downhole network during 2004 and 2005 stimulations - by B. Dyer

Dataset

This summary describes the velocity model used by B. Dyer to locate microseismic events during the 2004 and 2005 Soultz stimulations. It is the reference model applied for event locations in the 2004 and 2005 downhole catalogues, both available online.

Soultz-sous-Forêts

2004 - 2005

Model

Last updated on May 29, 2026

Velocity model used to locate seismic events from the surface network - Soultz-sous-Forêts 1993 Stimulation

Dataset in collection Episode: 1993 Stimulation Soultz-sous-Forêts

The Helm velocity model (after Beauce et al., 1991) was used to locate 1993 microseismic events recorded by the surface network. The corresponding event catalogue is available via the Helm surface‑network catalogue

Soultz-sous-Forêts

1993

Model

Last updated on May 28, 2026

Velocity model and station corrections used by B. Dyer to locate seismic events recorded by the downhole and the surface network - Soultz-sous-Forêts 2000 Stimulation

Dataset in collection Episode: 2000 Stimulation Soultz-sous-Forêts

This dataset provides the velocity model and station corrections used by B. Dyer (2001), combining GPK1 check‑shot velocities with a sonic‑log gradient, and refining corrections to remove traveltime bias. It links to Dyer’s downhole and surface

Soultz-sous-Forêts

2000

Model

Last updated on May 28, 2026